Skip to main content

Admin-Bulk


On Demand

Duration:
45 Minutes
Format:
Audio and Video
License:
Short Description:
The general sentiment around construction and modern technology is that the industry has been slow to embrace it. While this is true of the past, the current and future construction industry is all about modern technology. Not only does technology help to make the industry safer (something that has been a struggle for a very long time), but it is helping contractors to take back control of their budgets, to make smarter choices about project planning and equipment and is, consequently, pushing the green-construction trend forward. The purpose of this presentation is to provide a summary on the current technologies being used in the construction industry with a focus on concrete and to dig even further as to how these can be applied to repair projects. It will provide case studies on how using technology to bring ambient and concrete temperature, relative humidity and strength (among other) data online can help contractors be more efficient.
Base Price:
$25.00
Price with Discount:
$0.00

On Demand

Duration:
1 hour
Format:
Audio and Video
License:
Short Description:
Concrete is one of the most versatile building materials in the world and can produce floor slabs that provide an excellent platform for floor coverings and coatings. Water is an essential component of every concrete mixture.  Without it, concrete is not workable and finishable. If water is not used, the cement in the mixture cannot hydrate and gain the required strength.  However, once placement, finishing, and curing is complete, remaining moisture in the concrete can adversely affect the installation of flooring materials and the behavior of the slab itself. This webinar will discuss the importance of water in a concrete mixture and review a few concrete problems that water can cause, such as shrinkage, curling, ASR, delamination, dusting, and scaling. In addition, attendees will learn the design and construction considerations that can be used to minimize the potentially adverse effects of moisture in concrete.
Base Price:
$40.00
Price with Discount:
$15.00

On Demand

Duration:
47 Minutes
Format:
Audio and Video
License:
Access for 6 month(s) after purchase.
Short Description:
After only six years of service, a 6-foot long narrow piece of concrete spalled off an exposed slab edge of a 680-foot tall high-rise in Texas, and fell 160 feet to the podium below. The spall was attributed to premature corrosion at the drip edge. The building featured approximately 9,200 feet of exposed slab edge over its height. Given the potential risk to safety and property of additional concrete spalls, the Owner requested forensic investigations, which (1) identified other areas with signs of similar distress and (2) determined the underlying problem of low reinforcement cover at the drip edge was pervasive. In response, repair options were developed to address the problem and restore intended durability. Given the building height, difficult exterior-only access, downtown environment, and post-tensioning anchors along the slab edge, the repair design and construction both had unique challenges to consider and overcome.
Base Price:
$25.00
Price with Discount:
$0.00

On Demand

Duration:
45 Minutes
Format:
Audio and Video
License:
Access for 6 month(s) after purchase.
Short Description:
This update includes fall protection requirements for low slope roofs, façade access, and ladders as well as a timeline for compliance. This seminar not only addresses the recent 2017 updates to 29 CFR Part 1910 General Industry, but is an overview of all fall protection standards found in both Part 1910 for General Industry and Part 1926 Construction. The components of a Comprehensive Managed Fall Protection Program are also presented as well as specific requirements for the fall protection options available. Because many in the industry either do not understand the standards, are unaware of the available OSHA interpretations, or prefer not to spend money training their employees, misinformation is being spread. This seminar provides the truth about the required implementation of the updated fall protection standards and the standards that remain in place.
Base Price:
$25.00
Price with Discount:
$0.00

On Demand

Duration:
14 Minutes
Format:
Audio and Video
License:
Short Description:
The demonstration will include historical products and processes used for repair of tilt-up wall and precast concrete structures, new technology developments, proper material selection, and application methods.
Base Price:
$5.00
Price with Discount:
$0.00

Webinar

Duration:
1 hour
License:
Short Description:
This session describes common issues to consider and potential modifications when using PLC materials to ensure successful implementation.
Base Price:
$40.00
Price with Discount:
$15.00

Tue, Apr 16, 2024 - 01:00pm to 02:00pm CDT


On Demand

Duration:
15 Minutes
Format:
Audio and Video
License:
Short Description:
Selection of the most appropriate, professional tools for the setting of foam backer rod at the correct, consistent depth, without puncturing the skin, is the first step in creating a sealant joint that is long lasting and meets sealant manufacturer specifications. Next is the selection of the optimal sealant dispenser and nozzle. The size and orientation of the joint and the viscosity of the specified sealant will guide an installer to the most efficient drive, material containment unit (MCU) and nozzle for the application. Lastly, the selection of the most appropriate caulk finishing spatula and the technique employed are critical for the sealant to adhere and perform to specification.
Base Price:
$5.00
Price with Discount:
$0.00

On Demand

Duration:
1 hour
Format:
Audio and Video
License:
Short Description:
This discussion focuses on addressing critical areas to help avoid costly issues when installing protective coatings and sealers.
Base Price:
$40.00
Price with Discount:
$15.00

On Demand

Duration:
8 Minutes
Format:
Audio and Video
License:
Short Description:
This demonstration will review ICRI surface preparation guideline and material requirements, mixing, application protocol and product merits for achieving an ultra-smooth surface renovation.
Base Price:
$5.00
Price with Discount:
$0.00

On Demand

Duration:
1 hour
Format:
Audio and Video
License:
Short Description:
This webinar will discuss the keys to proper surface preparation including establishing the appropriate level of surface profile, evaluating the concrete substrate and the material being installed to determine the correct level of preparation as well as the correct methods and tools to achieve that level.
Base Price:
$40.00
Price with Discount:
$15.00

Please wait ...

Back to Top