Selection of the most appropriate, professional tools for the setting of foam backer rod at the correct, consistent depth, without puncturing the skin, is the first step in creating a sealant joint that is long lasting and meets sealant manufacturer specifications. Next is the selection of the optimal sealant dispenser and nozzle. The size and orientation of the joint and the viscosity of the specified sealant will guide an installer to the most efficient drive, material containment unit (MCU) and nozzle for the application. Lastly, the selection of the most appropriate caulk finishing spatula and the technique employed are critical for the sealant to adhere and perform to specification.
This demonstration will review ICRI surface preparation guideline and material requirements, mixing, application protocol and product merits for achieving an ultra-smooth surface renovation.
This webinar will discuss the keys to proper surface preparation including establishing the appropriate level of surface profile, evaluating the concrete substrate and the material being installed to determine the correct level of preparation as well as the correct methods and tools to achieve that level.
This unique webinar specifically focuses on the technology, process & application of using high-pressure water to remove concrete, called Hydro Demolition.
Industry experts Eric Muench and Dan Wald will discuss how to best select the right traffic bearing waterproof membrane technology for concrete protection.
Proper installation of the RFP and Mesh system on stucco substrates that have cracking issues will be demonstrated. This involves application of the product with embedded mesh. Also shown will be the application of a "Kiss Coat" of material applied over the previous first coat installation. Finally, how to perform a field adhesion test to ensure adequate bond will be demonstrated. The product, history, benefits and procedures for a successful application and installation will be discussed as well as proper surface preparation and how weather conditions can affect the installation. Demonstration will be hands-on installation on an actual building.
The prestressed beams in the Hampton Roads Bridge Tunnel Approach Spans were fabricated in about 1960 (west bound lane) and 1970 (east bound lane). The spans are 50-ft and 75-ft, respectively. The brackish water environment caused corrosion and failure of the bottom strands and deterioration and spalling of the cover concrete in many beams. A project in 2018 strengthened 30 of the more deteriorated beams as an alternative to posting or replacing the bridges. Carbon fiber composite wrap (CFCW) and external post-tensioning (PT) were used to strengthen the beams. Prior to construction, a PT mockup was done with one 50-ft (flexible filler) and one 75-ft (grout) beam to demonstrate that the contractor had the materials, equipment and staff to successfully do the external PT. This presentation describes the project’s mockups and construction and the anticipated increase in strength to be obtained from application of the CFCW and external PT.
Construction errors such as the misplacement of reinforcing steel and modifications like the addition of openings traditionally required intrusive repair methods. The addition of structural steel support or enlargement of the concrete elements is often not aesthetically pleasing or practical and the cost and time impacts are onerous. FRP strengthening solutions are non-intrusive, practical, and can be implemented quickly without major impact on the other building trades. The presentation will guide the audience through the feasibility assessment of FRP strengthening and implementation of the strengthening solution. The roles of the various parties, including the Engineer of Record, the FRP Design Engineer, the General Contractor, the Structural Contractor, and the FRP Installer, will be illustrated. Photographs of completed repairs will be presented.